Electric Drum Heater
MODEL WBO-55
The EXPO ENGINEERED WRAP-IT-HEAT® MODEL WBO-55 Water Reduction Drum Heater is designed to heat NON-FLAMMABLE material in U.S. 55 gallon METAL drums only. WBO-55 cannot be used on Plastic, Plastic Lined or Fiber Drums.
EXPO ENGINEERED Model WBO-55 Drum Heater is designed to reduce waste removal cost by accelerating the removal of water through evaporation, thus reducing the volume of material requiring eventual disposal.
Model WBO-55 is equipped with a thermostat and a resettable high limit cut-off switch. When the water based material is reduced, the high limit switch will activate shutting off the heater. When the container is refilled, restart the water reduction process by firmly pressing the RED reset button located on the front panel. WBO-55 also comes equipped with a spring loaded toggle for snug fit, 6 foot power cord and high ampere three pin plug. For 240V operation, use NEMA 6-15 Outlet. FOR INDOOR USE ONLY.
TO COMPLY WITH E.P.A. REGULATIONS IN YOUR STATE, THE USER MUST ENSURE THAT THE WASTE MATERIAL BEING REDUCED WILL NOT RELEASE TOXIC MATERIAL INTO THE ATMOSPHERE.
DO NOT USE TO HEAT FLAMMABLE MATERIALS, MATERIALS THAT ARE ADVERSLEY EFFECTED BY HEAT WHICH WOULD MAKE THEM HAZARDOUS TO ONE’S HEALTH OR USE IN HAZARDOUS AREAS.
The WRAP-IT-HEAT Model WBO-55 Drum Heater is U.L. Listed and C.S.A. Certified.
SPECIFICATIONS
Diameter .........................................................22-1/2"
Shipping weight .......................................14 lbs. (Approx.)
Operating Voltage......................240 Volts AC at 60 Hz.
Power Output............ ........3,000 Watts (10,236 Btu/Hr).
Ampere Draw ...........................................12.5 Amperes.
Thermostat Range ......................................70° to 250°F.
Reset Activates At ................................................250°F.
