Increase flow rate of viscous materials with a safe, efficient Electric Drum Heater.

MODEL TRX-55

The WRAP-IT-HEAT® Model TRX-55 Drum Heater, is a thermostatically controlled drum heater  with a three heat switch. Model TRX-55 Drum Heater is for standard 55 gallon all METAL drums.  TRX-55 cannot be used on Plastic, Plastic Lined or Fiber Drums.

EXPO ENGINEERED Model TRX-55 is designed for heating materials with GOOD HEAT RECEPTIVITY. Thermostat bulb senses temperature in an area remote from the active heating element. You have the choice of  two thermostat ranges: High, 200°F - 400°F, and Low, 60°F - 250°F. 120V and 240V rating available. Three heat switch allows three wattage ratings per thermostat setting and voltage rating: HIGH, Maximum Watts; MEDIUM, 1/2" Maximum Watts and LOW, 1/4" Maximum Watts. Equipped with spring loaded toggle clamp for snug fit, 6 foot power cord and high ampere three pin plug.  For 120V operation, use NEMA 5-20 Outlet.  For 240V operation, use NEMA 6-15 Outlet.  FOR INDOOR USE ONLY.

TRX-55 is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a NON-HAZARDOUS area.

The WRAP-IT-HEAT® Model TRX-55 Drum Heater is U.L. Listed and C.S.A. Certified.

 

SPECIFICATIONS                                                                     

Diameter .............................................................................22-1/2"

Shipping weight ....................................................14 lbs. (Approx.)

Operating Voltage..................120V AC or 240V AC Single Phase

Power Output.......................1,920W @ 120V or 3,000W @ 240V              

Thermostat Range......................60°F to 250°F or 200°F to 400°F         

Amperage ..................................16 A at 120 V & 12.5 A  at 240V                                                        

 

MODEL TRX-30

The WRAP-IT-HEAT® Model TRX-30 Drum Heater, is a thermostatically controlled drum heater with a three heat switch. Model TRX-30 Drum Heaters for standard 30 gallon all METAL drums.  TRX-30 cannot be used on Plastic, Plastic Lined or Fiber Drums.

EXPO ENGINEERED Model TRX-30 is designed for heating materials with GOOD HEAT RECEPTIVITY. Thermostat bulb senses temperature in an area remote from the active heating element. You have the choice of  two thermostat ranges: High, 200°F - 400°F, and Low, 60°F - 250°F. Standard units come in a 120 volt rating. Three heat switch allows three wattage ratings per thermostat setting and voltage rating: HIGH, Maximum Watts; MEDIUM, 1/2 Maximum Watts and LOW, 1/4 Maximum Watts. Equipped with spring loaded toggle clamp for snug fit, 6 foot power cord and high ampere three pin plug.  For 120V operation, use NEMA 5-20 Outlet .  FOR INDOOR USE ONLY.

TRX-30 is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a NON-HAZARDOUS area.

The WRAP-IT-HEAT® Model TRX-30 Drum Heater is U.L. Listed and C.S.A. Certified.

 

SPECIFICATIONS

Diameter .........................................................................18-1/2"

Shipping weight ................................................12 lbs. (Approx.) 

Operating Voltage..................................120V AC Single Phase 

Power Output....................................................1,920W @ 120V              

Thermostat Range..................60°F to 250°F or 200°F to 400°F                                                               

Amperage ..............................................................16 A at 120 V 

 

MODEL TRX-16

The WRAP-IT-HEAT® Model TRX-16 Drum Heater, is a thermostatically controlled drum heater with a three heat switch. Model TRX-16 is for standard 16 gallon all METAL drums.  TRX-16 cannot be used on Plastic, Plastic Lined or Fiber Drums. 

EXPO ENGINEERED Model TRX-16 is designed for heating materials with GOOD HEAT RECEPTIVITY. Thermostat bulb senses temperature in an area remote from the active heating element. You have the choice of  two thermostat ranges: High, 200°F - 400°F, and Low, 60°F - 250°F. Standard units come in 120 volts rating. Three heat switch allows three wattage ratings per thermostat setting and voltage rating: HIGH, Maximum Watts; MEDIUM, 1/2 Maximum Watts and LOW, 1/4 Maximum Watts. Equipped with spring loaded toggle clamp for snug fit, 6 foot power cord and standard three wire plug for grounded operation.  FOR INDOOR USE ONLY.

TRX-16 is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a NON-HAZARDOUS area.

The WRAP-IT-HEAT Model TRX-16 Drum Heater is U.L. Listed and C.S.A. Certified.

 

SPECIFICATIONS

Diameter ........................................................................14-1/2"

Shipping weight ..............................................10 lbs. (Approx.)  

Operating Voltage................................120V AC Single Phase 

Power Output...................................................1,500W @ 120V              

Thermostat Range.................60°F to 250°F or 200°F to 400°F

Amperage ..........................................................12.5 A at 120 V 

 

MODEL TRX-5

The WRAP-IT-HEAT® Model TRX-5 Pail Heater, is a thermostatically controlled drum heater with a three heat switch. Model TRX-5 is for standard 5 gallon all METAL pails. TRX-5 cannot be used on Plastic, Plastic Lined or Fiber Pails.

EXPO ENGINEERED TRX-5 is designed for heating materials with GOOD HEAT RECEPTIVITY. Thermostat bulb senses temperature in an area remote from the active heating element. You have the choice of  two thermostat ranges: High, 200°F - 400°F, and Low, 60°F - 250°F. Standard units come in a 120 volt rating. Three heat switch allows three wattage ratings per thermostat setting and voltage rating: HIGH, Maximum Watts; MEDIUM, 1/2 Maximum Watts and LOW, 1/4 Maximum Watts. Equipped with spring loaded toggle clamp for snug fit, 6 foot power cord and standard three wire plug for grounded operation.  FOR INDOOR USE ONLY.

TRX-5 is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a NON-HAZARDOUS area.

The WRAP-IT-HEAT Model TRX-5 Pail Heater is U.L. Listed and C.S.A. Certified.

 

SPECIFICATIONS

Diameter ................................................................11-1/4"

Shipping weight .........................................7 lbs. (Approx.) 

Operating Voltage.........................120V AC Single Phase 

Power Output............................................1,500W @ 120V              

Thermostat Range...........60°F to 250°F or 200°F to 400°F                                                                  

Amperage ...................................................12.5 A at 120 V 

Note: If you require a CUSTOM designed Drum Heater for a special application, please consult your distributor or the manufacturer.