Increase flow rate of viscous heat sensitive materials with a safe, efficient Electric Drum Heater.
MODEL LIM-55 E/W
The WRAP-IT-HEAT® Model LIM-55 E/W Drum Heater, is specifically designed to assist the flow of viscous materials contained in a High Density Polyethylene plastic drum. Model LIM-55 E/W is for standard 55 gallon drums with a diameter 22-1/2".
EXPO ENGINEERED Model LIM-55 E/W 9-1/4” Wide Drum Heater for plastic drums is a 120 volts AC heater rugged aluminum steel construction. The heat delivered to the drum does not exceed 165°F as recommended by plastic drum manufacturers. This is accomplished with a pre-set bimetal thermostat mounted directly on the heating band. LIM-55 E/W is activated with an easily accessible on/off switch.
Model LIM-55 E/W is equipped with a spring loaded toggle clamp for snug fit, on/off indicator light, 6 foot power cord and 3 wire plug for grounded operation. FOR INDOOR USE ONLY.
LIM-55 E/W is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a NON-HAZARDOUS area.
The WRAP-IT-HEAT Model LIM-55 E/W Drum Heater is U.L. Listed and C.S.A. Certified.
SPECIFICATIONS
Diameter............................................................................22-1/2"
Width....................................................................................9-1/4"
Shipping weight.................................................14 lbs. (Approx.)
Operating Voltage..........................................................120V AC
Ampere Draw.............................6.67 Amperes at 120 Volts AC
Power Output..................800 Watts at 120 Volts AC 50/60 Hz.
