Electric Drum Heater
thermostat control with three heat switch
Increase flow rate of hard to mix materials with a safe, efficient Electric Drum Heater.
The WRAP-IT-HEAT® Model AGM-55 Drum Heater, is a thermostatically controlled drum heater with a three heat switch. Model AGM-55 Drum Heater is designed for heating hard to mix materials with GOOD HEAT RECEPTIVITY, such as tallow, lard and similar materials. Model AGM-55 is to be used on METAL drums only. AGM-55 cannot be used on Plastic, Plastic Lined or Fiber Drums.
Thermostat bulb senses temperature in an area remote from the active heating element. You have the choice of two thermostat ranges: High, 200°F - 400°F, and Low, 60°F - 250°F. 120V rating available. A three heat switch allows three wattage ratings per thermostat setting and voltage rating: HIGH, Maximum Watts; MEDIUM, 1/2" Maximum Watts and LOW, 1/4" Maximum Watts. Equipped with spring loaded toggle clamp for snug fit, 6 foot power cord and standard three wire plug for grounded operation. FOR INDOOR USE ONLY.
AGM-55 is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a NON-HAZARDOUS area.
The WRAP-IT-HEAT Model AGM-55 Drum Heater is U.L. Listed and C.S.A. Certified.
MODEL AGM-55
SPECIFICATIONS
Diameter .................................................................................22-1/2"
Shipping weight ........................................................14 lbs. (Approx.)
Operating Voltage................................................................120V AC
Output.................................120 Volts AC/1750 Watts (5,985 Btu/Hr)
Thermostat Range..........................60°F to 250°F or 200°F to 400°F
Amperage ..................................................14.6 Amperes at 120 Volts
